WB Electronics
Back
Support - Infinity USB Unlimited
Installation instructions
· Windows 98
· Windows ME
· Windows 2000
· Windows XP/Vista/7

User's guide (web)
· Infinity PasswordSafe
· Infinity PasswordSafe WinLogon
· Infinity SIM Editor

User's guide (pdf)
· Users manual (UK, DE, FR, DK)
· Users manual (NL)
· Users manual (IT)
· Users manual (ES)
· Users manual (NO)
· Users manual (PL)
· Users manual (PT)
· Users manual (GR)
· Users manual (EE)
· Users manual (IS)

How to
· Use the VCP mode
· Use the multiprogrammer mode
· Identify serialnumbers
· Use the commandline interface

User forum
· Forum


How to - Use the commandline interface
A commandline interface was implemented in the software for Infinity USB Unlimited starting from version 2.61.

The commandline interface makes it possible to enable VCP / Phoenix mode, and will be extended as demands grow.
In the current version the following switches are available:

-enablevcpEnables phoenix mode and creates a virtual COM port (VCP), must be used with the -createcom command.
-createcom:X(X = 1 to 255) - Specifies the port number to create.
-name:nameName of the programmer to use, in a multi programmer invironment. Each programmer must have been named before use. Uses default programmer if -name is left out.
-frq:frequency(3.58 | 3.68 | 6.00 | Any frequency between 0.8 to 25MHz) - Chooses frequency. Defaults to 3.579 if left out.
-boost:frq multiplier(1.00 to 3.00) - Chooses frequency-multiplier for transparent boost. Defaults to 1.00 if left out.
-polarity:resetpolarity(phoenix | smartmouse) - Chooses resetpolarity. Defaults to phoenix if left out.
-3vSets card powersupply = 3.3V. Defaults to 5.0V if left out.
-profile:profilenameSpecifies which VCP profile to use. For a list of valid profiles refer to the “Enable VCP” window of the Infinity USB Unlimited software. Defaults to “Default” profile if left out.
-disablevcp
Disables VCP mode and exits the application.


Examples
Enables phoenix mode 3.579Mhz and creates COM4:
"c:\program files\infinity usb unlimited\infusb.exe" -enablevcp -createcom:4


Enables phoenix mode 3.58Mhz, boostfactor 1.25 (total frequency 4.475MHz) and creates COM4:
"c:\program files\infinity usb unlimited\infusb.exe" -enablevcp -createcom:4 -frq:3.58 -boost:1.25


Enables phoenix mode 6.00Mhz and creates COM5:
"c:\program files\infinity usb unlimited\infusb.exe" -enablevcp -createcom:5 -frq:6.00


Enables smartmouse mode 6.00Mhz and creates COM4:
"c:\program files\infinity usb unlimited\infusb.exe" -enablevcp -createcom:4 -frq:6.00 -polarity:smartmouse


Enables phoenix mode 3.579Mhz on the programmer named “Infinity 1” and creates COM4:
"c:\program files\infinity usb unlimited\infusb.exe" -enablevcp -createcom:4 -name:"Infinity 1"


Enables phoenix mode 6.00Mhz and creates COM5 with the default VCP profile:
"c:\program files\infinity usb unlimited\infusb.exe" -enablevcp -createcom:5 -frq:6.00 –profile:”Default”


Disables VCP mode of all active Infinity USB Unlimited:
"c:\program files\infinity usb unlimited\infusb.exe" -disablevcp


Error codes
The application returns the following error codes upon error:

4: Syntax error (Check the parameters for errors).

5: The specified programmer could not be found (Connect an Infinity USB Unlimited, or make sure you have specified the right -name value).

14: Could not create VCP (Make sure you have not specified a COM port which is already in use).
Copyright ©2001-2024 WB Electronics - All rights reserved - Privacy policy